Order Book Now Closed. Check S-ASX.21 or S-ASX-LQ products for supply.

The S-ASX range comprises 10 models offering LTHW heating in 30,35,40,45,50 outputs in the single fan range and 60,70,80,90 and 100kW outputs in the multiple fan format. All the units are capable of generating up to 65°C flow temperature. Depending on model the units achieve COP between 4.00 and 4.70 at 7°C ambient air temperature and 35°C flow. The control system allows the units to be operated in cascade allowing up to 16 units.

The units are of monobloc design, with the 30-50kW model suitable for indoor or outdoor installation, and the multi fan 60-100kW units for outdoor installation only. Heat energy from the ambient air is obtained from the R410A refrigerant circulating inside a bank of copper and aluminium fins and then this energy is passed, after the compression cycle, to the heating circuit through a stainless steel brazed heat exchanger. The circuit is controlled by the standard supplied temperature probes and pressure transducers and is protected by high and low pressure switches. The plate heat exchanger and all hydraulic pipework is thermally insulated to avoid condensation and reduce heat loss.

All models are fitted as standard with a modulating pump allowing close matching of heat demand to heat delivery and come, as standard, with multiple cascade capability and ModBus connectivity. Electrical load soft start is also standard ensuring electrical load on start-up is minimal. Additionally the units are designed as standard with the lowest acoustic performance in mind with external ‘wings’ on the 30-50Kw units and integral dampers on the larger output multi-fan units

  • Ten models ranging from 30-100kW
  • SCOP up to 4.26
  • Output temperature up to 65°C
  • Integrated modulating pump
  • Soft start and cascade software as standard
  • Low noise design
  • ModBus connectivity enabled